Concentrandosi sulla ricerca, sviluppo, produzione e vendita di fili e cavi.
Cavo di saldatura
Welding cable is a specialised cable used in welding equipment, usually made of multiple strands of fine copper wire stranded together. It is usually black in appearance or wrapped in a rubber sheath, and has a certain degree of softness and elasticity that enables it to bend and twist freely in a variety of complex working environments. The conductor part of the welding cable, i.e. the copper wire inside, has excellent electrical conductivity and is able to carry large welding currents without significant heating, thus ensuring a stable and continuous transmission of current to the welding tool. Its insulating layer is generally made of high-quality rubber or plastic material, with good insulating properties and resistance to abrasion, aging, high and low temperatures, etc., effectively preventing current leakage and safeguarding the safety of the operator.
Construction
Conductor: Multi-stranded stranded conductor of ultra-fine bare copper wire, conductor construction according to VDE 0295/IEC 60228.
Characteristics
1.YH cable is working under low voltage (maximum voltage is 200V) and high current, which requires certain resistance.
2. The long-term permissible working temperature of welding handle cable should not exceed 65℃.
3. The motor lead wire cable is frequently moved, twisted and cast, which requires softness and good bending performance.
4. In the application of easy to be sharp steel components of the scraping, rubbing, so the requirements of the cable insulation tear-resistant, wear-resistant and other mechanical properties.
5. The use of complex environmental conditions, such as sunlight, water boiling, contact with mud, oil, acid and alkali liquids, etc., requires a certain degree of weather resistance and oil resistance, solvent resistance.
NO.1, Jiangnan Cable dispone di tecnologie e attrezzature di produzione avanzate. Dalla produzione dei conduttori alla lavorazione degli isolamenti, delle schermature e delle guaine, ogni passaggio è preciso e rigoroso per garantire l'alta qualità dei cavi di media tensione.
NO.2, il controllo di qualità è estremamente rigoroso. L'azienda ha istituito un perfetto sistema di controllo qualità, dalla selezione delle materie prime ai prodotti finiti che lasciano la fabbrica, controllando ad ogni livello. Ogni cavo di media tensione deve essere sottoposto a una serie di test rigorosi per garantire che i prodotti soddisfino o addirittura superino gli standard nazionali.
NO.3, Jiangnan Cable ha investito molto nella ricerca e nello sviluppo. In base alla domanda del mercato e alle esigenze particolari dei clienti, possiamo sviluppare cavi di media tensione con caratteristiche diverse, come una migliore resistenza ambientale e una migliore capacità di trasporto di corrente. Inoltre, la ricca linea di prodotti può soddisfare le diverse esigenze di vari progetti complessi e fornire ai clienti soluzioni di cavi complete.
I nostri casi
Quello che abbiamo finito
| Personalizzato | Specifiche del cavo | Materiale isolante | Costruzione dello scudo | Materiale della guaina | Struttura dell'armatura | Prestazione speciale | Lunghezza | ||||||||
| Sezione trasversale del conduttore | Numero di core | tipo di materiale | Spessore dell'isolamento | Tipo di schermatura | Numero di strati di schermatura | Selezione del materiale | Identificazione del colore | Tipo di armatura | Strati di armatura | Resistenza al fuoco | Prestazioni impermeabili | Prestazioni ignifughe | Resistenza al freddo | Campione di richiesta personalizzazione contatori | |
& Radico; | & Radico; | & Radico; | & Radico; | & Radico; | & Radico; | & Radico; | & Radico; | & Radico; | & Radico; | & Radico; | & Radico; | & Radico; | & Radico; | ||
Working voltage: Uo/U 100/100V
Test voltage: 1000 V
Minimum bending radius:
H01N2-D: 12 x cable outer diameter
H01N2-E:
10 x cable outer diameter
Operating temperature:
Mobile installation: -25° C to +80° C
Fixed installation: -40° C to +80° C
Flame retardant: cable according to IEC 60332-1.
Product details
Product standard: GB5013.6-1997 Q/12YJ3153-2000
Product use: YH-type welding machine cable is suitable for the secondary side of the ground voltage AC 200V and pulsating DC peak 400V welding machine with the secondary side of the wiring and connecting the electric welding tongs with.
Use characteristics:
2451EC81(YH), 2451EC82(YHF) type cable conductor's long-term permissible working temperature should not exceed 65℃.
The long-term permissible working temperature of cable conductor of YH 85℃ type shall not exceed 85℃.
YHF type has certain characteristics such as oil resistance and non-extended flame.
The long-term permissible working temperature of the conductor of EH cable shall not exceed 70℃, with better abrasion resistance and also with certain oil resistance.
Overview: welding machine cable is suitable for welding machine secondary side wiring and connecting the welding clamp special cable, rated voltage AC not more than 200V and pulsating DC peak 400V. structure for single core, using multi-stranded soft wire twisting made. The conductive core is wrapped with heat-resistant polyester film insulation tape, and the outer layer is made of rubber insulation and sheath as a protective layer.
Welding Cable Usage details
Use Requirements
(1) welding machine cable is in the low voltage (high voltage of 200V) under the conditions of high current work, requires a certain degree of heat resistance.
(2) The long-term allowable working temperature of the cable should not exceed 65℃.
(3) The cable is frequently moved, twisted and cast, the requirements of soft, good bending performance.
(4) in the application of the sharp steel components are susceptible to scraping, rubbing, so the requirements of the cable insulation tear-resistant, wear-resistant and other good mechanical properties.
(5) the use of complex environmental conditions, such as sun, boiling, contact with mud, oil, acid and alkali liquids, etc., requires a certain degree of weather resistance and oil resistance, solvent resistance.
(6) Sometimes encounter hot welding parts, requiring good resistance to heat deformation.
(7) often move, the requirements of the outer diameter is small, light weight.
Due to the electrical properties of such cable requirements are not high, and the use of complex environmental conditions, the structure of the requirements to meet a variety of complex environmental factors is not appropriate. Attention to improve the conditions of use, to prevent external damage.
Product parameters: welding machine cable type
245IEC81(YH) Rubber sheathed welding machine cable
245IEC82(YHF) Neoprene or other equivalent synthetic elastomer rubber sheathed welding machine cable
YH85℃ 85℃ grade welding machine cable
EH Polyvinyl chloride elastomer sheathed welding machine cables (orange and blue)
YH Natural rubber sheathed welding machine cable
YHF Chloroprene or other equivalent synthetic rubber elastomer sheathed welding machine cable